Creating esp32 image...
Merged 2 ELF sections
Successfully created esp32 image.
Generated /tmp/pvt-build-buffered/pvt_mqtt_lab.bin
[1029/1029] cd /tmp/pvt-build-buffered/esp-idf/esptool_py && /tmp/pvt-idf-tools/python_env/idf5.5_py3.12_env/bin/python /tmp/pvt-esp-idf-v5.5.5/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /tmp/pvt-build-buffered/partition_table/partition-table.bin /tmp/pvt-build-buffered/pvt_mqtt_lab.bin
pvt_mqtt_lab.bin binary size 0xd7620 bytes. Smallest app partition is 0x100000 bytes. 0x289e0 bytes (16%) free.

Project build complete. To flash, run:
 idf.py flash
or
 idf.py -p PORT flash
or
 python -m esptool --chip esp32 -b 460800 --before default_reset --after hard_reset write_flash --flash_mode dio --flash_size 2MB --flash_freq 40m 0x1000 ../../../../tmp/pvt-build-buffered/bootloader/bootloader.bin 0x8000 ../../../../tmp/pvt-build-buffered/partition_table/partition-table.bin 0x10000 ../../../../tmp/pvt-build-buffered/pvt_mqtt_lab.bin
or from the "/tmp/pvt-build-buffered" directory
 python -m esptool --chip esp32 -b 460800 --before default_reset --after hard_reset write_flash "@flash_args"
